Archive for the ‘UST Shafts’ Category
UST Shafts
Golf Club Putters: Six Factors to Consider When Selecting a Putter
These six factors must be taken into consideration so that you make an informed choice of putter type and to make sure that it feels as it should be.
1. The lie angle. It is an angle between the shaft and the ground. This factor determines if the putter head is sitting perfectly flat on the ground when you are putting. Get one that lets the head of the club rest squarely on the ground when you take your stance.
 |
Stock# UST1152, NEMA-C Flange Pool Filter Motor, Single Speed, HP 1-1/2, RPM 3450, Volts 115/230, Max. Amps 18.6/9.3, Service Factor 1.0, Frame 56J, Shaft Thd, Approx. "AG" 12-1/8 |
|
A.O. Smith C-Face Pool Motor Up Rated 1.5 HP Threaded Shaft # UST1152 Features: All Copper Winding Auto Protector Capacitor Start NEMA "56C" Face Mount Not Reversible Open Drip Proff Rotation (CCW Pump End) Stainless Steel - 303 Threaded Shaft Sealed Ball Bearing 50 degree C Ambient 60 HZ Sealed Switch Design "1081" Design 304 Brg... |
 |
Nickent 4DX D-Spec Driver with Graphite Shaft (SHAFT TYPE: Nickent Ust Sr3)ReviewsThe driver does all that I ask of it! I have never hit a driver this well. I got a great deal on Amazon and it was well worth the price!! Every nickent golf club that I have is top of the line and in my opinion out performs the leading brands Hands down. The only con is that your friends will see you hit this driver and they will want one too!I have a driver and all of my utility clubs are Nickents. Best clubs I've ever owned. And believe me I've tried all the top brands such as nike, taylormade R7, Calloway and Cleveland ETC. Average Rating: |
|
Nickent 4DX D-Spec Driver with Graphite Shaft : The D-Spec 's loft, lie, CG (center of gravity), MOI (moment of inertia) and weight have all been configured to make the ball have the perfect draw. The D-Spec is engineered for players who prefer a flatter trajectory and a more workable ball flight and is set up for a faster swing speed... |
 |
UST Proforce V2 75 Wood Shaft |
|
UST Proforce V2 75 Wood Shaft : Building on the success of the wildly popular Proforce line, the V2 features a compilation of UST proven technologies. A balanced tip section promotes maximum energy transfer and the low torque reduces side spin for greater control... |
|
UST Proforce V2 .350" 65 Wood Shaft |
|
UST Proforce V2 .350" 65 Wood Shaft : Building on the success of the wildly popular Proforce line, the Proforce V2 Wood Shaft features a compilation of UST proven technologies. A balanced tip section promotes maximum energy transfer while the low torque reduces side spin for greater control... |
2. The length of the putter. The standard length for a putter is 35 inches. The right length for you depends on how you stand when you address the ball. A longer putter is better if you like to stand upright. A shorter putter is better if you prefer to bend over and be closer to the ground.
3. The total weight of the putter. Get one that does not feel too heavy. In general, use a lighter putter if you play on fast greens. A heavier putter may give you better results if you play on slow greens.
4. The size and shape of the head. A perimeter-weighted putter is the best. This type of putter has a recess in the middle of the head, with most of the weight distributed on the heel and toe. This will provide you with more solid putts on off-center hits.
5. The head material. This factor is often overlooked when choosing a good putter. Typically the cheaper putters will have heads made of PCS plastic, Aluminum or Zinc. Because the head material is light, you will be required to hit the ball harder to get it to go the same distance as you would if your club-head was made from a more expensive material. Generally, these putters cannot be adjusted for lie, loft angle or other variables.
On the other hand, the more expensive putters often use stainless steel, brass, titanium, wood or a mixture of these. You can find special displays of these putters with different lie angles and lengths already built in. These putters will feel more solid when you strike the ball, look much better at address and perform more consistently over time.
6. The grip type and size. Putters come with standard-size grips installed. This is not ideal for everyone. The larger your hands, the larger the width of the grip should be and, conversely, you should have a smaller diameter grip if your hands are small.
